Skip to content
← Work
// 24
RefIE-024
ClientProjekt własny
Year2025
Scale1:1
[3D Print][Photography]

A disposable-camera lens on a Sony mirrorless body

A lens element salvaged from a single-use Kodak, set in a printed body with a Sony E mount. The body is an open community model (Studio Fabi, CC BY-NC-SA licence) that we prepared for print, printed and assembled with the optics. Test photos by photographer Dominik Czerny.

Sample photo shot with this lens, the disposable-camera look. Photo: Dominik Czerny.
Sample photo shot with this lens, the disposable-camera look. Photo: Dominik Czerny.

Problem

The disposable-camera look appeals to photographers, but single-use cameras end after one roll and do not fit modern gear. The optics needed to move onto a body people already use every day.

Outcome

A working lens gives the disposable-camera look on a modern body. Test photos by Dominik Czerny show the characteristic soft effect. The body design is not ours: what we show here is the printing, assembly and optics test.

  1. 01We took apart a single-use Kodak camera and removed the lens element.
  2. 02We chose an open model of the body with a Sony E mount (Studio Fabi, CC BY-NC-SA) and prepared it for printing on our machines.
  3. 03We printed the bodies with a knurled ring and set the lens element in them.
  4. 04Photographer Dominik Czerny shot test photos confirming the disposable-camera look.

Specifications

IE-024
Optics
disposable Kodak lens
Body
3D print, Studio Fabi model (CC BY-NC-SA)
Mount
Sony E
Look
disposable-camera look
Collaboration
Dominik Czerny (photographer)
Year
2025

Process and prototypes

01

Finished product

02
Next project · IE-008Reverse-engineered Jeep Wrangler side step pad →