Skip to content
← Work
// 25
RefIE-025
ClientProjekt własny
Year2025
Scale1:1
[3D Print][Photography]

Sun hood for an Atomos Shinobi II monitor

A printed sun hood for an Atomos Shinobi II field monitor, in carbon-fibre PETG. The hood model comes from MakerWorld (by Madebymorten); we matched it to the monitor, set up the print in a stiff material and tested it outdoors.

The field monitor without the hood, top view.
The field monitor without the hood, top view.

Problem

In bright sunlight the field monitor screen became hard to read, which made it difficult to judge the shot outdoors.

Outcome

The hood shades the screen and makes the camera image easier to read in full sunlight. The hood design is not ours: what we show is the selection, printing and fitting.

  1. 01Measured the monitor with a caliper and picked a ready-made hood model for the Shinobi II (MakerWorld, by Madebymorten).
  2. 02Prepared the print in the Bambu slicer using PETG-CF.
  3. 03Printed the hood with FDM.
  4. 04Fitted the printed hood to the monitor in the field.

Specifications

IE-025
Application
monitor sun hood
Equipment
Atomos Shinobi II
Model
MakerWorld, by Madebymorten
Material
PETG-CF, FDM print
Year
2025

Process and prototypes

01

Photos

01

Finished product

02
Next project · IE-009Reverse engineering of a flower-stem guillotine →